张 伟,博士,中南大学副教授。

本页面主要目录有关于张伟的:人物简介、人物经历、研究方向、主要贡献、获奖记录等介绍

中文名

张伟

国籍

中华人民共和国

性别

男

民族

汉族

学位

博士

职业

教师

职称

副教授

任职机构

中南大学

人物简介

张 伟,材料学博士,中南大学粉末冶金研究院副教授/硕士生导师,德国亚琛工业大学(RWTH Aachen University)访问学者,“许昌英才计划”行业领军人才。

人物经历

2010年1月博士毕业于中南大学粉末冶金国家重点实验室。2010年05月至2013年8月在粉末冶金国家工程研究中心和中南大学粉末冶金工程研究中心有限公司担任副总裁,同时于2013年5月在中南大学冶金工程博士后流动站完成博士后工作。2013年8月-2014年10月赴德国亚琛工业大学开展研究工作。2014年10月至2017年10月在国内某公司(主板上市)金属粉末制造事业部 & 3D打印事业部总工(博士后兼)。

研究方向

主要从事粉末冶金新材料(高熵合金、钛基结构材料、金刚石工具材料等)、粉末冶金新技术(雾化制粉、3D打印/增材制造、激光熔覆等等)和金属材料物理冶金/力学行为(复合材料及涂层界面行为、塑性变形、表面改性/耐磨)的研究。

主要贡献

近年来承担的主要项目

主持国家青年自然科学基金项目和国家重点基础研究发展计划(973计划)子项目各1项;作为主要成员参加国家高技术研究发展计划(863计划)项目1项、国防军品协作配套科研项目1项、国家科技支撑计划项目1项;目前主持企业横向课题项目4项。

发表学术型论文情况

近年来,发表学术型论文近50篇(其中SCI检索40余篇,EI检索30余篇),其中代表性论文如下:

1.FeCoCrNiMo high-entropy alloys prepared by powder metallurgy processing for diamond tool applications. Powder Metallurgy, 61(2): 123-130 (2018)

2.Effect of powder oxygen content on the microstructure and properties of Co–Cr dental alloys fabricated by selective laser melting. Powder Metallurgy, 61(2): 157-163 (2018)

3.Microstructure evolution and hardness of an ultra-high strength Cu-Ni-Si alloy during thermo-mechanical processing. Journal of Materials Engineering and Performance, 25(7), 2615-2625 (2016).

4.Solidifying Features of Atomized β-solidifying TiAl Alloy Powder by PREP and its Hereditary during SPS. World PM 2016, Hamburg, Germany, 9-13 October 2016.

5.Study on surface nano-crystallizationof TiAl alloys induced by HEBMT. Applied Mechanics and Materials, 184-185, 1250-1254 (2012).

6.Comparative assessmentof microstructure and compressive behaviors of PM TiAl alloy prepared by HIP and psedudo-HIP technology. Powder Metallurgy, 54(2),133-141 (2011) .

7.Preparation and Properties of Porous Ti-Al Alloys by Reactive Infiltration.Powder Metallurgy, 54(3), 253-256 (2011).

8.Constitutive modeling and processing map for elevated temperature flow behaviors of a powder metallurgy titanium aluminide alloy. Journal of Materials Processing Technology, 209(12-13), 5363-5370 (2009).

9.Simulation of hot compression of Ti–Al alloy, Intermetallics, 15(5-6), 700-705 (2007).

获奖记录

国家教育部2016年度高校科学研究优秀成果二等奖(自然科学)