简历
1998至2002年在航天材料及工艺研究所工作，主要从事聚合物基防热烧蚀材料制备工艺和性能的研究。
2006年在德国凯泽斯劳滕大学获得博士学位。
2007年加入国家纳米科学中心工作。目前已发表SCI论文十余篇。
研究方向
1）聚合物基纳米复合材料在不同应力条件下的力学行为，主要包括疲劳、断裂、蠕变、摩擦磨损等；
2）纳米复合材料的细观力学行为；
3）功能纳米复合材料；
4）纳米复合材料的宏量制备技术及应用研究。
研究领域
纳米复合材料
代表论著
1. Jiang, H-H., Zhou, H-J., Zhang, H.: Study on the flame-retardant mechanism of PET fibers, Journal of Beijing University of Chemical Technology
2. Zhang, H., Zhang, Z., and Breidt, C.: Comparison of short carbon fiber surface treatment on epoxy composites: I. Enhancement of the mechanical properties, Composites Science and Technology
3. Zhang, H., Zhang, Z.: Comparison of short carbon fiber surface treatment on epoxy composites: II. Enhancement of the wear resistance, Composites Science and Technology
4. Yang, J-L., Zhang, Z., Zhang, H.: The essential work of fracture of polyamide 66 filled with TiO2 nanoparticles, Composites Science and Technology
5. Chang, L., Zhang, Z., Zhang, H. and Friedrich, K.: Effect of nanoparticles on the tribological behaviour of short carbon fibre reinforced poly(etherimide) composites, Tribology International
6. Chang, L., Zhang, Z., Zhang, H. and Schlarb, A.K.: On the sliding wear of nanoparticles filled polyamide 6,6, Composites Science and Technology
7. Zhang, H., Zhang, Z., Yang, J-L., Friedrich, K.: Temperature dependence of crack initiation fracture toughness of various nanoparticles filled polyamide 66, Polymer
8. Zhang, H., Zhang, Z., Friedrich, K.: Properties improvements of in situ epoxy nanocomposites with reduced interparticle distance at high nanosilica content, Acta Materialia
9. Song, L., Zhang, H., Zhang, Z. and Xie, S.S.: Processing and mechanical performance of SWNT paper reinforced PEEK nanocomposites, Composites Part A
10. Zhang, H., Zhang, Z., Friedrich, K.: Effect of fibre length on the wear resistance of short carbon fibre reinforced epoxy composites, Composites Science and Technology
11. Jiang, Z-Y., Zhang, H., Liu, S., Zhang, Z.: Improved interfacial bonding of carbon fiber/epoxy matrix modified by well-dispersed nano-SiO2 particles, Journal of Experimental Mechanics
12. Zhang, H., Zhang, Z.: Influence of surface-modified TiO2 nanoparticles on fracture behavior of injection molded polypropylene, Frontiers of Materials Science in China
13. Zhang, H., Tang, L-C., Zhang, Z. Friedrich, K., Sprenger, S: Fracture behaviors of in situ silica nanoparticle-filled epoxy at different temperatures, Polymer
14. Liu, S., Zhang, H., Zhang, Z., Sprenger, S.: Epoxy nanocomposites with high volume content nanosilica particles. Journal of Nanoscience and Nanotechnology
15. Starkova, O., Zhang, Z., Zhang, H., Park, H-W.: Limits of the linear viscoelastic behaviour of polyamide 6,6 filled with TiO2 nanoparticles: Effect of strain rate, temperature, and moisture. Materials Science and Engineering A
16. Liu, S., Zhang, H., Zhang, Z., Zhang, TH., Sprenger S.: Tailoring the mechanical performance of epoxy resin by various nanoparticles. Polymers and Polymer Composites
17. Jiang, Z-Y., Zhang, H., Zhang, Z., Murayama, H., Okamoto, K.: Improved bonding between PAN-based carbon fibers and fullerene-modified epoxy matrix. Composites Part A
18. Zhang, H., Zhang, H., Tang, L-C., Zhang, Z., et al.: Wear-resistant and transparent acrylate-based coating highly filled with nanosilica particles. Tribology International (accepted after minor revision).
