李峰 （哈尔滨理工大学教授）

学习简历

1994.09-1997.07 齐齐哈尔市实验中学 高中生

1997.09-2001.07 哈尔滨理工大学金属材料专业 工学学士

2001.09-2004.02 哈尔滨理工大学材料加工专业 工学硕士

2004.03-2007.12 哈尔滨工业大学塑性加工专业 工学博士

2008.06-2010.10 哈尔滨工程大学材料科学与工程 博士后

工作简历

2008.03-2009.07 哈尔滨理工大学材料成型系 讲师

2009.08-2012.08 哈尔滨理工大学材料成型系 副教授(破格)

2012.09-2018.09 哈尔滨理工大学材料成型系 教授

2018.10-至今 哈尔滨理工大学材料成型系 教授、博士生导师

科研方向

1. 高性能轻合金短流程挤压成组技术研究

2. 板材柔性智能介质阻尼成形技术与装备

3. 轻量化成形模具设计、制造与工艺优化

4. 材料成型过程CAD/CAE/CAM集成技术

科研项目

作为负责人先后主持国家自然基金(2项)、国防973子课题、教育部博士点基金、中国博士后基金、省自然基金、省教育厅、市基金等多项课题的研究工作，代表性课题如下：

1.国家自然科学基金面上项目(51675143)：镁合金连续变通道直接挤压成形机理与形/性协同调控机制，2017.01-2020.12

2.国家自然科学基金青年基金(51205094)：镁合金转模挤压成形机理与协调变形控制，2013.01-2015.12

3.国防973子课题(613152-16)：法向压力作用下典型材料成形性能测试方法及装置，2011.01-2014.06

4.国家重点实验室开放基金(P2016-09)：磁性智能介质加压板材拉深成形规律研究，2016.01-2017.12

5.省普通高等学校新世纪优秀人才培养计划(1253-NCET-008)：板材冷压变形连接理论及关键技术研究板材冷压变形连接理论及关键技术研究，2013.06-2016.06

学术论文

自工作以来(截止2018年底)先后在Mater Design、Mat Sci Eng A、Mater Lett、Comp Mater Sci、J Mater Sci Technol、Int J Adv Manuf Tech、Mech Res Commun、JOM、J Mater Eng Perform、Acta Metall Sin-Engl、Mater Trans、J Eng Manuf、J Mech Eng Sci等国内外学术期刊上以一作或通讯作者发表SCI论文61篇；编著2部。近年发表论文如下：

1.Xu Bo Li, Feng Li*, Xue Wen Li. Effect of different temperatures on deformation characteristics of AZ31 magnesium alloy by continuous variable cross-section direct extrusion. International Journal of Advanced Manufacturing Technology, 2018, 95(9-12):4623-4628 (SCI)

2.Ze-ping Bao, Feng Li*, Wen-yong Shi. Formability analysis of aluminum double-layer sheets using a magnetorheological fluid. Results in Physics, 2018,10:227-232 (SCI)

3.Cheng Chuang Jin, Feng Li*, Ze Ping Bao. Study on deep drawing of 304 stainless steel rectangular case with magnetic medium. International Journal of Advanced Manufacturing Technology, 2018, 94(1-4): 1525-1531 (SCI)

4.Yang Liu, Feng Li*, Xue Wen Li, Wen Yong Shi. Properties of Rolled AZ31 Magnesium Alloy Sheet Fabricated by Continuous Variable Cross-Section Direct Extrusion. Journal of Materials Engineering and Performance, 2018, 27(3):1334-1342 (SCI)

5.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Analysis and Texture Evolution of the CVCEDed AZ31 Magnesium Alloy by Hot Rolling. Journal of Materials Engineering and Performance, 2018,27(9):4732- 4739 (SCI)

6.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Characteristics of AZ31 Magnesium Alloy Processed by Continuous Variable Cross-Section Direct Extrusion (CVCDE). Part 1: Texture Evolution. JOM, 2018,70(10):2327-2331 (SCI)

7.Xu Bo Li, Feng Li*, Xue Wen Li. Microstructural Characteristics of AZ31 Magnesium Alloy Processed by Continuous Variable Cross-Section Direct Extrusion (CVCDE). Part 2: Dynamic Recrystallization. JOM, 2018,70(10):2332-2337 (SCI)

8.Ze Ping Bao, Feng Li*, Cheng Chuang Jin. Investigations on deformation behavior of square box deep drawing using a magnetorheological fluid (MRF). International Journal of Advanced Manufacturing Technology, 2018, 99(5-8):1459-1466 (SCI)

9.Feng Li*, Hong Wei Jiang, Yang Liu. Microstructure and Texture Evolution During the Alternate Extrusion of an AZ31 Magnesium Alloy. JOM, 2017,69(1):93-99 (SCI)

10.Feng Li*, Fu Jian Zhou, Mo Nan Wang, Shu Yue Zhu, Cheng Chuang Jin. New processing research on sheet metal bidirectional pressure forming using a magnetorheological fluid. International Journal of Advanced Manufacturing Technology, 2017,88(1):923-929 (SCI)

11.Feng Li*, Hong Wei Jiang, Qiang Chen, Yang Liu. New extrusion method for reducing load and refining grains for magnesium alloy. International Journal of Advanced Manufacturing Technology, 2017, 90(1): 73-79 (SCI)

12.Hong Wei Jiang, Feng Li*, Xiang Zeng. Microstructural characteristics and deformation of magnesium alloy AZ31 produced by continuous variable cross-section direct extrusion. Journal of Materials Science & Technology, 2017, 33(6):573-579 (SCI)

13.Feng LI*, Yang LIU, Xu-Bo LI. Dynamic recrystallization behavior of AZ31 magnesium alloy processed by alternate forward extrusion. Frontier of Materials Science, 2017,11(3):296-305 (SCI, 期刊封面)

14.Yang Liu, Feng Li*, Hong Wei Jiang. Microstructural Analysis and mechanical properties of AZ31 magnesium alloy prepared by alternate extrusion(AE). International Journal of Advanced Manufacturing Technology, 2017, 92(9-12):4293-4301 (SCI)

15.Feng Li*, Yang Liu, Xu Bo Li. Microstructure Evolution and Deformation Behavior of AZ31 Magnesium Alloy During Alternate Forward Extrusion. Acta Metallurgica Sinica(English Letters), 2017,30(11):1135- 1144 (SCI)

16.Feng Li*, Nan Bian, Yongchao Xu, Xiang Zeng. Dynamic Recrystallization and Microstructure Evolution of AZ31 Magnesium Alloy Produced by Extrusion through Rotating Container. Modern Physics Letters B, 2016,30(1): 1550261 (SCI)

17.Feng Li*, Hong Bin Wu, Xiang Zeng. Investigation of 7A09 aluminum alloy prepared by continuous variable cross-section direct extrusion(CVCDE). International Journal of Advanced Manufacturing Technology, 2016,82(5-8):1447-1453 (SCI)

18.Fujian Zhou, Feng Li*, Liansheng Shi, Hongwei Jiang. An optimizing process of profiled cross-sectional aluminum alloy porthole die extrusion using response surface methodology. Modern Physics Letters B, 2016,30(8): 1650098 (SCI)

19.Feng Li*, Fu Jian Zhou, Mo Nan Wang, Peng Xu, Cheng Chuang Jin. Experimental studies on flexible forming of sheet metals assisted by magnetic force transfer medium. JOM, 2016,68(8): 2261-2267 (SCI)

20.Feng Li*, Xiao Chong Sui, Peng Xu, Qiang liu. Effects of process conditions on the matched cold-pressing joining quality between dissimilar sheets. International Journal of Advanced Manufacturing Technology, 2015,76(9-12):1837-1843 (SCI)

21.Feng Li*, Wei Shi, Nan Bian, Hongbin Wu. Effect of accumulative strain on grain refinement and strengthening of ZM6 magnesium alloy during continuous variable cross-section direct extrusion. Acta Metallurgica Sinica(English Letters), 2015,28(5):649-655 (SCI)

22.Feng Li*, Peng Xu, Xiao Chong Sui, Fu Jian Zhou. Investigation of a New Method for Sheet Deep Drawing Based on the Pressure of Magnetic Medium. Materials Transactions, 2015,56(6):781-784 (SCI)

23.F. Li*, X. Zeng, G. J. Cao. Investigation of microstructure characteristics of the CVCDEed AZ31 magnesium alloy. Materials Science and Engineering A, 2015, 639:395-401 (SCI)

24.Feng Li*, Peng Xu, Xiaochong Sui, Fujian Zhou. Evaluation of the quality for sheet deep drawing using a magnetorheological fluid(MRF). Modern Physics Letters B, 2015,29(24):1550141 (SCI)

25.F. Li*, X. Zeng, Q. Chen, G. J. Cao. Effect of local strains on the texture and mechanical properties of AZ31 magnesium alloy produced by CVCDE. Materials and Design, 2015, 85:389-395 (SCI)

26.F Li*, N Bian, Y C Xu, X L Zhang. Theoretical analysis of extrusion through rotating container: Torque and twist angle. Computational Materials Science, 2014,88(6):37-44 (SCI)

27.Feng Li*, Xin Long Zhang, Bao Guo Yuan, Xiao Chong Sui. Research on the influence rules of hole type on the quality of sheet embedded cold-pressing joining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 2014,228(7):775-783 (SCI)

28.Feng Li*, Xiao Chong Sui, Xin Long Zhang, Qiang Liu. Research on Quality and Reliability of Cold-Pressing Joining Between Aluminum and Stainless Sheets. JOM, 2014,66(8):1454-1463 (SCI)

29.F Li*, N Bian, Y C Xu. An analytical model on twisting deformation of rod extrusion through conical die with rotating container. Mechanics Research Communications, 2014,61:27-35 (SCI)

30.Feng Li*, Xiao Chong Sui, Xin Xin Guo, and Hong Bin Dai. Experiment on the Reliability of Aluminum- Stainless Steel Joints by Cold-Pressing Joining. JOM, 2014,66(10):2161-2167 (SCI)

31.F. Li*, X. Zeng, N. Bian. Microstructure of AZ31 magnesium alloy produced by continuous variable cross-section direct extrusion(CVCDE). Materials Letters, 2014,135:79-82 (SCI)

32.Feng Li, Xin Long Zhang*, Wei Shi. Deformation Behavior in the Uniaxial Tension Process of Aluminum and Aluminum Alloy Sheets under Fluid Pressure. JOM, 2013,65(5):604-612 (SCI)

33.Feng Li*, Jun Feng Lin, Ming Da Xu, and Xiao Chong Sui. Forming Mechanism of Cold-Press Connection Between Heterogeneous Sheets. JOM, 2013,65(11): 1433-1440 (SCI)

34.Feng Li*, Jian Hui Li, Chao Li, L L Wang. Research on the deformation mechanism and failure behavior of punch bonding technology with dissimilar sheet metals. JOM, 2012,64(5):600-606 (SCI)

35.LI Feng*, LIN Jun-feng, SUI Xiao-chong, BIAN Nan, XU Ming-da. Cold-pressing deformation characteristics of steel-aluminum sheets joining. Transactions of Nonferrous Metals Society of China, 2012, 22(S2):553-559 (SCI)

国家发明专利

1.李峰等. 旋转凹模的金属挤压成形方法，国家发明专利，专利号：ZL200810064386.7 (授权)

2.李峰等. 一种降低塑性回弹的金属板材加工成形方法，国家发明专利，专利号：ZL200810064528.X (授权)

3.李峰等. 大截面差变径管件的加工装置及成形方法，国家发明专利，专利号：ZL200910071561.X (授权)

4.李峰等. 一种变径管件内压成形装置及方法，国家发明专利，专利号：ZL201010032430.3 (授权)

5.李峰等. 连续变截面直接挤压制备细晶材料的装置及方法，国家发明专利，专利号：ZL201010032431.8 (授权)

6.李峰等. 磁致介质加压的板材充液拉深成形装置及方法，国家发明专利，专利号：ZL201210486544.4 (授权)

7.李峰等. 变截面空心构件内压成形装置及方法，国家发明专利，专利号：ZL201210486545.9 (授权)

8.李峰等. 板材液压成形中摩擦影响的测试装置及方法，国家发明专利，专利号：ZL 201310097449.X (授权)

9.李峰等. 流体压力作用下板材成形性能测试装置及方法，国家发明专利，专利号：ZL201310115829.1 (授权)

10.李峰等. 一种金属板材变形连接成形方法，国家发明专利，专利号：ZL201310115830.4 (授权)

11.李峰等. 带筋整体壁板挤轧复合成形装置及方法，国家发明专利，专利号：ZL201310116069.6 (授权)

12.李峰等. 变阶面空心构件挤压成形方法，国家发明专利，专利号：ZL201310115271.7 (授权)

13.李峰等. 一种阶变截面型材模块化挤压成形装置及方法，国家发明专利，专利号：ZL201310323167.7 (授权)

14.李峰等. 一种金属材料变截面挤扭成形装置及方法，国家发明专利，专利号：ZL201310571193.1 (授权)

15.李峰等. 齿轮径向旋锻成形装置及方法，国家发明专利，专利号：ZL201410008451.X (授权)

16.李峰等. 柔性链球式芯棒的管材压弯成形方法，国家发明专利，专利号：ZL201410008325.4 (授权)

17.李峰等. 金属交替挤压成形装置及方法，国家发明专利，专利号：ZL201510208534.8 (授权)

18.李峰等. 板材磁性介质阻尼成形装置及方法，国家发明专利，专利号：ZL201510212432.3 (授权)

19.李峰等。一种基于电流变液的板材拉深成形装置及方法，国家发明专利，专利号：ZL201610024505.0 (授权)

20.李峰等. 弯曲构件错距挤压成形装置及方法，国家发明专利，专利号：ZL201710156437.8 (授权)

21.李峰等. 磁性介质辅助管材内压成形方法，国家发明专利，专利号：ZL201710156361.9 (授权)

22.李峰等. 高性能金属板材的短流程挤压成形装置及方法，国家发明专利，申请号：201810181290.2

23.李峰等. 金属张力挤压成形装置及方法，国家发明专利，申请号：201810357482.4

24.李峰等. 板材批量模块化侧向挤压成形装置及方法，国家发明专利，申请号：201811219659.0

25.李峰等. 金属板材控幅挤压成形装置及方法，国家发明专利，申请号：201811219554.5

奖励及人才称号

2016年黑龙江省自然科学二等奖1项(排名3)；

2011年黑龙江省技术发明二等奖1项(排名5)；

2011年黑龙江省自然科学三等奖1项(排名3)；

2017年哈尔滨市科学技术二等奖1项(排名1)；

2013年黑龙江省自然科学技术学术成果一等奖1项(排名1)；

2012年黑龙江省高等教育学会优秀教育科研成果一等奖1项(排名1)；

2011年哈尔滨理工大学校青年拔尖创新人才；

2013年黑龙江省普通高等学校新世纪优秀人才；

2013年第十一届哈尔滨市青年科技奖；

2014年第十四届霍英东教育基金会高等院校青年教师奖；

2016年第二届哈尔滨理工大学校青年五四奖章；

2018年材料加工工程省级领军人才梯队后备带头人

社会兼职

2014.10-至今 《精密成形工程》编委

2018.10-至今 中国机械工程学会环境保护与绿色制造技术分会委员

2017.11-至今 中国机械工程学会生产工程分会模具制造专业委员会委员

2017.05-至今 中国兵工学会精密成形工程委员会委员

2016.02-至今 中国塑性工程学会精密锻造专业委员会委员

2016.01-至今 中国材料研宄学会镁合金青年委员会委员

2011.11-至今 中国塑性工程学会青年工作委员会委员

2009.06-至今 中国机械工程学会高级会员

2010.07-至今 国家自然科学基金通讯评审专家

2013.09-至今 北京市自然科学基金评审专家

2013.10-至今 天津市自然科学基金评审专家

2012.07-至今 吉林省科学技术奖评审专家

2011.01-至今 黑龙江省科技项目评审专家

2010.08-至今 哈尔滨市杰青/攻关/科技奖励评审专家

Nano Energy(13.12、SCI)、Materials and Design(SCI)、Journal of Alloys and Compounds(SCI)、International Journal of Advanced Manufacturing Technology(SCI)、Metallurgical and Materials Transactions B(SCI)、JO M(SCI)、Mechanics of Advanced Materials and Structures(SCI)、Journal of Materials Engineering and Performance(SCI)、Journal of Engineering Manufacture(SCI)、Journal of Mechanical Engineering Science(SCI)、Journal of Testing and Evaluation(SCI)、Materials Research Express(SCI)、Advances in Mechanical Engineering(SCI)、Materials Research Innovations(SCI)、Engineering Failure Analysis(SCI)、International Journal of Mineral Processing(SCI)、Journal of Environmental Sciences(SCI)、Indian Journal of Engineering and Materials Sciences(SCI)、AIP Advances(SCI)、Materials Chemistry and Physics(SCI)、Sensors and Actuators B: Chemical(SCI)、Arabian Journal of Chemistry(SCI)、Journal of Saudi Chemical Society(SCI)、Chinese Chemical Letters(SCI)、Saudi Journal of Biological Sciences(SCI)、Transactions of Nonferrous Metals Society of China(SCI)、Journal of Central South University(SCI)、Journal of Magnesium and Alloys、Frontiers of Mechanical Engineering、International Journal of Engineering and Technology Innovation、International Journal for Computational Methods in Engineering Science and Mechanics、Materials Research、The Open Mechanical Engineering Journal、稀有金属材料与工程(SCI)、航空学报(EI)、工程力学(EI)、中国机械工程、船舶工程等国内外期刊通讯审稿专家。

授课情况

材料加工理论(塑性加工部分) 研究生课

特种塑性成形 本科生课

快速成型及3D打印技术 本科生课

塑性成形过程数值模拟 本科生课

学生培养

毕业：11级~16级(全日制)研究生14名获硕士学位，其中，9人获研究生国家奖学金（教育部颁发，评选比例为2~3%），12人获校科技活动先进个人；

在读：17级~18级(全日制)研究生6名。

招研要求

素质要求：诚邀勤奋刻苦、诚实守信、乐于专研、开拓进取、勇于创新的有识有志之士加入；

专业要求：材料类、机电类、工程力学等理工科相关专业均可；

招生规模：硕士生2~4人/届，博士生1~2人/届。