杨健,男,第一批入选者、客座教授、博士生导师,中南大学冶金学院教授。
本页面主要目录有关于杨健的:人物简介 、当前研究方向、代表性论文等介绍
杨健,男,第一批入选者、客座教授、博士生导师,中南大学冶金学院教授。
本页面主要目录有关于杨健的:人物简介 、当前研究方向、代表性论文等介绍
杨健
中华人民共和国
汉
、日本名古屋大学
教育、教授
中国共产党
杨健1985年本科毕业于北京科技大学,1988年获北京科技大学钢铁冶金专业硕士学位。1988年至1999年,任长沙矿冶研究院冶金工艺研究所助理工程师、工程师、高级工程师。2003年获日本名古屋大学材料工程专业博士学位。在日本名古屋大学材料工程专业,2003年担任助教、2004年升任讲师、2006年升任副教授。2007年8月担任宝山钢铁股份有限公司研究院冶金工艺研究所首席研究员,2009年10月入选宝钢“金苹果计划”炼钢技术领域核心小组成员并担任负责人,2010年4月入选上海市"侨界十杰",2010年8月入选中国侨界贡献奖(创新人才)。杨健博士发表科研论文180篇,申报国家发明专利9项,先后于2002年和2007年两度荣获日本铁钢协会泽村最佳论文奖。
1、氧化物冶金和夹杂物控制
2、无缺陷板坯连铸技术
3、铁水预处理工艺优化
4、二次精炼工艺优化
1)Jian YANG, Kai ZHU, Ruizhi WANG and Jianguo SHEN:Improving the Toughness of Heat Affected Zone of Steel Plate by Use of Fine Inclusion Particles, Steel Research International, in press.
2)YANG Jian, ZHU Kai, WANG Ruizhi, ZHANG Yi, SHEN Jianguo: Excellent Heat Affected Zone Toughness Technology Improved by use of Strong Deoxidizers, Baosteel Technical Research, in press.
3)Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Improvement of Grain Refining Efficiency for Mg-Al Alloy Modified by the Combination of Carbon and Calcium, Journal of Alloys and Compounds, 470(2009), Issues 1-2, pp. 134-140
4)Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Effect of strontium on the Grain Refining Efficiency of Mg-3Al Alloy Refined by Carbon Inoculation, Journal of Alloys and Compounds, 470(2009), Issues 1-2, pp. 228-232.
5)YANG Jian, SHEN Jian-guo, ZHU Kai and WANG Guo-dong: Progress in Technology Development of Oxide metallurgy for Manufacturing Steel Plates with Excellent HAZ Toughness, Baosteel Technical Research, 2(2008), No. 4, pp. 43-50.
6)YANG Jian, ZHU Kai, SHEN Jian-guo and KUWABARA Mamoru: Improvement of Steel cleanliness by Deoxidation with Mg Vapor, Journal of Iron and Steel Research International, 15(2008), No. 10, pp. 675-680.
7) Jun Du, Jian Yang, Mamoru Kuwabara, Wenfang Li and Jihua Peng: Effects of Carbon and/or Alkaline Earth Elements on Grain Refinement and Tensile Strength of AZ31 Alloy, Materials Transactions, 49(2008), No. 10, pp. 2303-2309.
8) Jun Du, Jian Yang, Mamoru Kuwabara, Wen-fang Li and Ji-hua Peng: Effect of Manganese and/or Carbon on the Grain Refinement of Mg-3Al Alloy, Materials Transactions., 49(2008), No. 1, pp. 139-143.
9) K. Yoshitaka, J. Yang, Z. Z. Liu and M. Kuwabara: クロミア(Cr2O3)のAl熱還元反応の反応メカニズム, 高温学会誌, 34(2008), No. 1, pp. 26-31.
10) Z. Z. Liu, Y. Kobashi, K. Nagai, J. Yang and M. Kuwabara: Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel, Tetsu-to-Hagané, 93(2007), No.11, pp. 655-663.
11) Jun Du, Jian Yang, Mamoru Kuwabara, Wen-fang Li and Ji-hua Peng: Effect of iron and/or carbon on the grain refinement of Mg-3Al alloy, Mater. Trans., 48(2007), No. 11, p. 2903.
12) J. Yang, M. Kuwabara, T. Asano, A. Tyuma and J. Du: Effect of Lime Particle Size on Melting Behavior of Lime-containing Flux, ISIJ Int., 47(2007), No. 10, pp. 1401-1408.
13) J. Yang, T. Mori and M. Kuwabara: Mechanism of Carbothermic Reduction of hematite in Hematite-Carbon Composite Pellets, ISIJ Int., 47(2007), No. 10, pp. 1394-1400.
14) T. Mori, J. Yang and M. Kuwabara: Mechanism of Carbothermic Reduction of Chromium Oxide, ISIJ Int., 47(2007), No. 10, pp. 1387-1393.
15) R. Takata, J. Yang and M. Kuwabara: Characteristics of Inclusions Generated during Al-Mg Complex Deoxidation of molten Steel, ISIJ Int., 47(2007), No. 10, pp. 1379-1386.
16) K. Yasuda, Y. Saiki, T. Kubo, M. Kuwabara and J. Yang: Influence of High-Power Ultrasonic Irradiation on Primary Nucleation Process during Solidification, Jpn. J. Appl. Phys., 46(2007), No. 7B, pp. 4939-4944.
17) J. Yang, T. Yamasaki and M. Kuwabara: Behavior of Inclusions in Deoxidation Process of Molten Steel with in Situ Produced Magnesium Vapor, ISIJ Int., 47(2007), No. 5, pp. 699-708.
18) J. Yang, M. Kuwabara, T. Sakai, N. Uchida, Z. Z. Liu and M. Sano: Simultaneous Desulfurization and Deoxidation of Molten Steel with In Situ Produced Magnesium Vapor, ISIJ Int., 47(2007), No. 3, pp.418-426.
19) J. Yang, M. Kuwabara, T. Sawada and M. Sano: Rate of Isothermal Reduction of MgO with Al, Tetsu-to-Hagané, 93(2007), No. 3, pp. 201-207.
20) S. Mukawa, Y. Ueshima, M. Sano, J. Yang and M. Kuwabara: The Effect of Magnesium Gas Injecting Conditions on the Rate of Hot Metal Desulfurization, ISIJ Int., 46(2006), No. 12, pp.1778-1782.
21) Z. Z. Liu, Y. Kobayashi, J. Yang, K. Nagai and M. Kuwabara: Effect of Nano-scale Copper Sulfide Precipitation on Mechanical Properties and Microstructure of Rapidly Solidified Steel with Tramp Copper Element, Mater. Trans., 47(2006), No. 9, pp. 2312-2320.(SEM Photos Revealed on the Cover of Materials Transactions)
22) J. Yang, M. Kuwabara, T. Sawada and M. Sano: Kinetics of Isothermal Reduction of MgO with Al, ISIJ Int., 46(2006), No. 8, pp. 1130-1136.
23) Z. Z. Liu, Y. Kobayashi, J. Yang, K, Nagai and M. Kuwabara: “In-situ” Observation of the delta/gamma Phase Transformation on the Surface of Low Carbon Steel Containing Phosphorus with Different Rates, ISIJ Int., 46(2006), No. 6, pp.847-853.
24) Y. Saiki, T. Kubo, M. Kuwabara and J. Yang: Acoustic-Cavitation-Based Production of Foamed Metallic Material, Jpn. J. Appl. Phys., 45(2006), No. 5B, pp. 4793-4799.
25) Z. Z. Liu, Y. Kobashi, K. Nagai, J. Yang and M. Kuwabara: Morphology Control of Copper Sulfide in Strip Casting of Low Carbon Steel, ISIJ Int., 46(2006), No. 5, pp. 744-753. (SAWAMURA Best Article Award of The Iron and Steel Institute of Japan)
26) J. Yang, M. Kuwabara, Z. Z. Liu, T. Asano and M. Sano: Mechanism of Aluminothermic Reduction of MgO, Tetsu-to-Hagané, 92(2006), No. 4, pp. 239-245.
27) J. Yang, M. Kuwabara, K. Okumura and M. Sano: Effect of Operating Parameters on Resulfurization in Desulfurization Process with In Situ Produced Magnesium Vapor, Tetsu-to-Hagané, 92(2006), No. 4, pp. 246-253.
28) J. Yang, M. Kuwabara, T. Teshigawara and M. Sano: Resulfurization Rate in Magnesium Desulfurization Process of Molten Iron, Tetsu-to-Hagané, 92(2006), No. 4, pp. 254-261.
29) J. Yang, M. Kuwabara, Z. Z. Liu, T. Asano and M. Sano: In Situ Observation of Aluminothermic Reduction of MgO with High Temperature Optical Microscope, ISIJ Int., 46(2006), No. 2, pp. 202-209.
30) J. Yang, M. Kuwabara, K. Okumura, Z. Z. Liu and M. Sano: Improvement of Desulfurization Efficiency of Molten Iron with Magnesium, revue de Metallurgie, (2005), December, pp. 22-23.
31) J. Yang, M. Kuwabara, K. Okumura and M. Sano: Prevention of Resulfurization in the Desulfurization Process with Magnesium Vapor Produced In Situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int., 45(2005), No. 12, pp. 1795-1803.
32) J. Yang, M. Kuwabara, T. Teshigawara and M. Sano: Mechanism of Resulfurization in the Magnesium Desulfurization Process of Molten Iron, ISIJ Int., 45(2005), No. 11, pp. 1607-1615.
33) T. Kubo, M. Kuwabara and J. Yang: Visualization of Acoustically Induced Cavitation Bubbles and Microjets with the Aid of High Speed Camera, Jpn. J. Appl. Phys., 44(2005), No. 6B, pp. 4647-4652.
34) J.Yang, K.Okumura, M.Kuwabara and M.Sano: Improvement of Desulfurization Efficiency of Molten Iron with Magnesium Vapor Produced In Situ by Aluminothermic Reduction of Magnesium Oxide, Metallurgical and Materials Transactions B, 34B(2003), No. 5, pp. 619-629.
35) M.Sano, K.Okumura, J.Shan and J.Yang: Iron and Steel Refining with Magnesium Vapor Injection, SEAISI Quarterly, 32(2003), No. 2, pp. 12-18.
36) T. Kubo, M. Kuwabara and J. Yang: Analysis of the Behavior of Muti-Bubbles Generated by Acoustic Cavitations, Technical Report of IEICE(The Institute of Electronics Information and Communication Engineers), 103(2003), No. 11, pp. 35-37.
37) K. Kondo, M. Kuwabara and J. Yang::Model Experiment about Effects of Process Variables on Ultrasonic Decomposition of Chemical Substances in Wastewater, Technical Report of IEICE(The Institute of Electronics Information and Communication Engineers), 103(2003), No. 11, pp. 39-42.
38) J. Yang, K. Okumura, M. Kuwabara and M. Sano: Behavior of Magnesium in the Desulfurization Process of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 42(2002), No. 7, pp. 685-693.
39) J. Yang, K. Okumura, M. Kuwabara and M. Sano: Effects of Operating Parameters on Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 42(2002), No. 6, pp. 595-602.
40) J. Yang, K. Okumura, M. Kuwabara and M. Sano: Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Aluminothermic Reduction of Magnesium Oxide, ISIJ Int. 41(2001), No.9, pp. 965-973.
41) J. Yang, S. Ozaki, R. Kakimoto, K. Okumura, M. Kuwabara and M. Sano: Desulfurization of Molten Iron with Magnesium Vapor Produced In-situ by Carbothermic Reduction of Magnesium Oxide, ISIJ Int. 41(2001), No. 9, pp. 945-954. (SAWAMURA Best Article Award of The Iron and Steel Institute of Japan)
42) W. L. He, S. B. Qin, Z. X. Li and J. Yang: Manufacture of Spherical Ni(OH)2 with High Density, Power Source Technology, Oct. 1995.
43) J. Yang, Z. X. Li, S. B. Qin and S. H. Xue: Distribution of Solid Particles in the Chlorination Furnace of Rich Titanium Ore, vanadium and Titanium, 22(1995), No. 1, pp.48-53.
44) J. Yang, Z. X. Li, S. B. Qin, Y. Q. Liao and S. H. Xue: Manufacture of Mg and Mg-Mn Alloy form Waste-slag of Chlorination of Rich Titanium Ore, Mining and Metallurgy Engineering, 14(1994), No. 4, pp.43-46.
45) J. Yang, Z. X. Li, S. B. Qin and S. H. Xue: Modeling Study on the Distribution of the chlorine Gas in the Chlorination Furnace of Rich Titanium Ore, Vanadium and Titanium, 21(1994), No. 6, pp.46-52.
46) Y. Qu, J. Yang and B. M. Xu: Mathematical Modeling of Flow Phenomena In Metal Bath Covered with Molten Slag, Acta Metallurgical Sinica, 26(1990),No. 3, pp.157-163.(In Chinese)
47)Y.Qu, J. Yang and B.M.Xu: Mathematical Modeling of Flow Phenomena in Metal Bath Covered with Molten Slag, Acta Metallurgical Sinica, 3(1990), No. 6, pp. 370-376.(In English)
48)Y. Qu, J. Yang and B. M. Xu: Study on the Slag-Metal Dispersion and Flow Phenomena in a Gas Stirred Reactor in Metallurgy, Chemical Reaction Engineering and Technology, 6(1990), No.1, pp. 72-78.
新亚洲娱乐(英文名:ASIA ENTERTAINMENT GROUP LIMITED,全称:新亚洲娱乐联盟集团有限公司)是一家以从事戏剧制作人及杂项戏剧服务为主的企业,成立于1999年,位于香港特别行政区。旗下分公司包括虎威艺能创作有限公司(TGS HK)、稻草人娱乐创作社(Scarecrow Entertainment)、虎威王朝音乐创作股份有限公司(TGS Music)、虎威活力娱乐传播有限公司(TGS Taiwan)、AK Entertainment(Korea)以及AEG Korea等。
印度孟买SENSEX30指数(又称孟买敏感指数)为印度最被广泛使用的指数,为投资印度的重要参考指标,是由孟买证券交易所发行。由于各类媒体提到的“印度股市”,实际上都是孟买股票交易所,因此,该交易所的SENSEX-30指数几乎成了印度股市的代名词。







